milling

milling

美 ['mɪlɪŋ] 　英 ['mɪlɪŋ]

• n.磨；制粉；碾碎；【矿】选矿
• adj.成群乱转的
• v.“mill”的现在分词
• 网络铣削；研磨；混炼

词形变化

英汉双解

英汉解释

英英解释

例句

A fixture is usually bolted to the machine table of a milling or boring machine; with a jig, this is often unnecessary.

工作夹具通常由螺栓固定在铣床或镗床的工作台上，而一般夹具则不需要用螺栓固定。

Michael Mann was there and just milling around in the lobby afterwards so my DH told him how much we enjoyed the film.

麦克尔曼在那里，在大厅踱着碎步，然后我的DH跟他说我们有多么喜欢这部电影。

If it is possible, be responsible for maintenance of the CNC milling machine and stretch bending machine.

如果可能，负责CNC数控铣床和拉伸折弯机的设备维护保养。

The integral-type milling cutter is mainly used for fine machining of a leaf-root profile and rough machining of a small leaf-root profile.

整体式铣刀刀具主要用于叶根型线的精加工及小叶根型线的粗加工。

I decided the best way was to cut out the logo on a milling machine. then mill a replacement piece out of another lid.

最后，我认为最好的办法是通过机床将商标削去，然后用另一块外壳的材料研磨修补。

This type is generally used for milling deep slots, since the staggering of teeth provides for greater chip space.

因为摇摆牙提供更加巨大的芯片空间，这个类型为碾碎深槽孔通常使用。

In high-speed milling, the geometrical factors of both feed rate and pick feed influence the surface roughness and machining efficiency.

高速铣削时，进给量和进给间隔不仅是影响加工表面粗糙度的重要几何因素，同时也是影响切削效率的重要因素。

He had looked at the milling sheep with a sour expression, said, "Some a these never went up there with you. "

不过他看过那些满地乱转的羊后，面露不悦：“这里头有些羊可没跟你们上山。”

Used for milling processing of the profile bending parts of aluminum curtain wall.

适用于铝塑幕墙型材，实现型材折弯处的铣槽加工；

The company has CNC, folding beds, cutting beds, milling machines, presses, lathes , Saw, argon welder and a series of sound equipment.

公司拥有CNC、折床、剪床、铣床、冲床、车床、锯床、氩焊机等一系列完善的设备。

Different specifications of the keyway is made up of different cemented carbide milling tool specifications out of a one-time processing.

不同规格的键槽是由不同规格的硬质合金铣刀具一次性加工出来的。

Junior high school or above, with two years of milling experience, proficiency, will be in map.

初中以上文化，有两年的铣工工作经验，熟练操作，会识图。

Each of the cutting edges of a milling cutter acts as an individual single-point cutter when it engages with the workpiece metal.

在铣刀切削工件金属时，铣刀的每条切削刃都象一单独的单刃刀具一样作用。

The book block milling back edge finish depends on the size of the angle in and out of frezer.

书芯铣背的边缘光洁度取决于铣刀进出角度的大小。

In this case, the amount of milling back, please! --the thunder from the out-of-mouth parts of the book set.

在此情况下，铣背量多了，就必然划破外帖书芯订口部位。

The method has no consumption of a milling tool, so as to lower management and maintenance cost.

没有了铣刀刀具的消耗，减低了管理和维护成本。

The spindle, to which the milling cutter is attached, may be horizontal (for slab milling), or vertical (for face milling).

纺锤，铣刀附上，也许是水平（为碾碎的平板），或者垂直（为端铣）。

The root of the quality, not lack of milling back, and are made of plastic difference not glued milling and broken pages.

究其质量原因，并非铣背不足所致，而是胶质差没有粘牢铣断的书页。

The versatility of the milling machine is contributed to a great extent by the variety of milling cutters that are available.

铣床的通用性由是可利用的铣刀的品种到大规模范围贡献。

Mixture through the ball milling method to make it uniform dispersion.

通过球磨混料法来解决各相的分散性问题。

So many different ideas are milling about in my head, but I can't settle down to work on any one of them.

我脑中浮现出很多不同的想法，但我却不能确定其中任何一个来付诸行动。

There was a crowd of people milling about in the streets.

有一大群人在街上转来转去。

With the popularity of CNC machine tools, production enterprises with the general CNC milling machine tool gear tooth economically feasible.

随着数控机床的普及，一般的生产企业用数控铣齿机床加工齿轮经济可行。

The research topics are the main contents of a CNC milling machine teeth of the electrical control system design.

本课题研究的主要内容是进行数控铣齿机床的电气控制系统的设计。

The result showed that the milling process simulation was an effective method to predict the machining distortion correctly.

研究表明，数值模拟方法是研究航空整体结构零件铣削加工变形的有效方法，可正确预测零件的加工变形。

Milling workers, many of whom had jobs elsewhere but were on the lookout for an upgrade, queued up for tours of each factory's facilities.

大批工人排队参观每家工厂的设施，其中许多在其它地方有工作，但仍关注着改善条件的机会。

Helical rotor is usually machined by shaped tools or equipped gears in common milling machine.

螺旋转子的加工一般是在普通铣床上采用成形刀及配挂齿轮的方法加工而成。

Heinicke is a German company and world market leader for drilling and milling machines for the wind power branch.

海尼肯是一家德国公司，它在风力打孔和研磨方面一直是国际市场中的领导者！

The Royal Palace shut briefly but four days later it was business as usual, with Norwegians and tourists milling around the forecourt.

皇宫建筑短暂关闭，但四天后就恢复营业，前院里尽是挪威人和游客在打转。

His wife Tien held, through the Bogasari flour mills, the state monopoly on the import and milling of wheat.

他的妻子Tien通过Bogasari磨粉厂控制了小麦进口和磨粉的垄断权。

It was pointed out that high speed milling is a trend of modern mold manufacturing, and can be widely used in mold process.

指出高速铣削技术是现代模具制造的发展方向之一，且高速铣削在模具制造中有广阔的应用和发展前景。

In the Heat & Power Plant of YPC, the single milling coal consumption of boiler increased gradually due to the change of coal-fuel variety.

因煤种变化等原因，扬子热电厂锅炉的磨煤单耗逐渐上升。

Gang milling In gang milling a number of milling cutters are fastened to the arbor to suit the profile of the workpiece to be machined.

在磨碎一些磨碎的刀具的帮伙中磨碎的帮伙被固定到轴以便适于工作件的概况是机器。

A scheme to transform a milling planer into a production miller for machining the cylinder cover of diesel engine is proposed in this paper.

介绍了将原有龙门铣床改造成加工柴油机汽缸盖的专用铣床的设计方案。

The gear milling positioning fixture is particularly suitable to be matched with the fixture of the mandrel positioning structure.

本发明特别适合芯轴定位结构的夹具配套使用。

Up milling (conventional milling). In up milling the workpiece is fed against the direction of cutter rotation, as shown in Fig. 12. 3a.

逆铣（传统铣削）：在逆铣中，工件逆着铣刀转动的方向进给，如图12.3a所示。

Capable of operating milling machines, surface grinders, lathes, CNC equipment, measuring equipment as well as wire and sinker EDM's.

可以操作铣床，磨床，加工中心，测量工具及线割放电加工机，

binding package on my computer for milling back, slotted-bed down to make it to the back of the book.

将胶订包本机上的铣背、开槽台下降，使其接触不到书背。

The software controls a linear scan noncontact laser imager for facial topography acquisition and a milling machine for pattern fabrication.

该软件可控制的线性扫描非接触式激光成像仪用于面部地形购置和铣床的格局捏造。

But it was chaos -- so many journalists, photographers, onlookers milling around outside what, back then, was a really small hospital.

但是那人潮汹涌--很多的记者、摄影师和旁观者在医院外面围着，当时这家医院还是家小医院。

If milling back and dehairing deep enough, will definitely affect the infiltration of rubber, resulting in off the page, the leaflet.

若铣背和打毛的深度不够，必然影响胶的渗透，从而造成脱页、散页的质量缺陷。

Finally, experiment of plasma deposition and milling manufacture are carried out on CNC machine controlled by Open CNC system software.

最后运用开发的开放式数控系统软件在复合机床上进行了等离子熔积和铣削加工实验。